TEPCO has done test runs with the ultrasound robot intended to detect the water level inside the torus tubes at Fukushima Daiichi. Tests done at unit 5 and unit 4 gave some information about the best way to obtain readings. They did run into issues in unit 4 where there was a thin layer of oil on the water. This caused issues for the sensor and camera. The solution proposed was to use a small jet of air to move the oil away while work was done. Work should be currently underway to attempt this test on the unit 2 torus tube according to TEPCO’s calendar.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than www.simplyinfo.org (or www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.