The gasket and flange in the photo upon closer inspection shows damage.
The flange plate it bent and a portion of the gasket is bulging out. This is an improper installation and damaged the flange plate.
This may have been the cause of the leak and is another example of shoddy installation work done at the plant. We were able to identify the component as coming from a company called Sankyo but were unable to confirm if they produce nuclear grade components. Since the water being carried is cooling water for the reactors and is still somewhat contaminated nuclear grade components should have been used. Below is a close up of the damaged flange and gasket.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than www.simplyinfo.org (or www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.