TEPCO released some images and information about the work progress on the 5th floor refueling floor of unit 2. This is where the Warrior robot became stranded and had to be abandoned after they were unable to restart it.
They have managed to cut down one of the reactor well fences using the Warrior robot. The second fence further across the refueling floor is where Warrior failed. It appears to have hung itself up while cutting loose the reactor well fence on the far side. This caused TEPCO to change the concrete sampling locations for the MEISTeR robot. It took samples near the blow out panel door and on the concrete reactor cover. Those have been extracted and taken for testing.
The cut made with the Warrior robot to remove the fence panels
Dropped reactor well fence panel in the practice lab. The Warrior robot as it sits stranded on the unit 2 refueling floor. After the battery discharged workers are unable to restart it even after recharging it. The “on” switch can only be manually activated on the robot itself. Since the radiation levels on the refueling floor are so high workers can not go in to restart it.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.