IRID reports progress on the new robot that will be used to attempt to look inside the reactor pedestal of unit 2 at Fukushima Daiichi. The tiny robot would be fed in through the X6 pipe penetration in the containment vessel wall onto the control rod drive rail and into the pedestal.
Earlier investigations into the containment structure of unit 2 showed that the control rod drive rail was missing in the last section as it enters the pedestal. There was also evidence of high heat and possible splatters of corium (melted fuel) around this opening. A pipe will be inserted to over come the gap and allow the robot to travel into the pedestal. The goal is to than drop it onto the grating inside the pedestal. What was not mentioned is what would be done if the grating is no longer there or too damaged for the robot to travel along the surface.
IRID currently reports the actual work inside unit 2 would happen in the first half of fiscal year 2015.
Video of the test can be found here. http://youtu.be/EHLIbbnvrJA
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2022 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.