TEPCO has announced that they have completed all of the work they can do on the unit 1 containment robot inspection (phase B1). The second robot’s did complete the planned inspection circuit and then took a look at the first robot that remained stranded. The crew did manage to obtain photos of the first robot and now have a better understanding of how it became stranded. Unfortunately the second robot saw its camera degrade to the point they could no longer view to drive it. The second robot will now be abandoned inside containment along with the first one.
The stranded first robot can be seen partially unfolded at the point it could no longer move. TEPCO noted where it is stuck appears it wedged one side of the robot in an gap on the catwalk that it could not release itself from.
We were also able to roughly estimate the radiation levels found underwater in containment. The radiation levels at the containment floor surface inside unit 1 at the point where they read 24.9 Sv/h on the catwalk would be roughly 8e+15 Sv/h if there was no water covering it.
IRID/TEPCO did manage to put out a new handout in English explaining some of the new findings
There were also two short videos published of robot #2’s work. It should be noted that some of the reporters at the TEPCO press conference have complained about TEPCO/IRID not releasing the entire video feed from this work. TEPCO tried to explain this away as it being trade secrets or nuclear security secrets but provided no detail to back up this claim.
The two new videos along with previous videos of this work and image stills can all be found here:
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.