TEPCO successfully removed the fuel handling crane from the spent fuel pool on August 2nd amid problems with fog. The work began around 11am where crane could be seen working in the pool. The machine was finally pulled and set on the ground around 1:18pm JST. The work was already challenging and high risk without adding fog into the complexity. TEPCO didn’t report any problems, they also did not say what would happen to the crane now that it was brought to the ground or where it would be stored.
Other work at the plant was suspended while this took place in case there was a radiation release in the process.
A ten minute video of the work can be found here
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2021 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.