TEPCO has reported via their Facebook page that the stuck shield blocks in unit 2 have been removed. These shielding blocks were fused to the reactor building floor due to rust in front of the CRD hatch door. They needed to be removed in order to access that hatch to insert the robot that will investigate inside containment.
TEPCO used a small piece of heavy equipment with a clamp to shake the steel plate. This eventually broke the blocks loose. With the blocks removed TEPCO will proceed as planned with the robot inspection of containment, expected to take place in the next two months.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2021 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.