Researchers developed a 3D imaging system that could be used to located Fukushima’s melted nuclear fuel for under $150 using off the shelf parts.
Researchers in the UK and Japan developed the imaging system using the AVEXIS ROV as the mobile platform. A group of sensors were mounted to the AVEXIS then paired with cameras to provide location information. This allows the system to determine where the image was taken to later put them all together to create the 3D images.
The system was tested at the JAEA Naraha testing facility in Fukushima prefecture. This center includes a number of mock up facilities that model parts of the reactor systems at Fukushima Daiichi. The test run in the containment tank at Naraha was considered successful. Mock debris was mapped with sufficient accuracy that the system could conceivably be used at Daiichi.
No formal plan to use this new system has been announced so far.
Read more about this project here.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than www.simplyinfo.org (or www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.