A recent report by Sandia National Lab indicated that about 140,000kg of melted fuel and debris was released out of the unit 1 reactor vessel. These calculations were part of a larger effort to model the progression of the meltdowns at Fukushima using the known reactor data.
“The present analysis shows gross failure at about 14 hours when approximately 140,000 kg of core materials was released to the drywell cavity region”
We took those quantities and attempted to visualize what that bulk of melted fuel would look like compared to the pedestal region below the reactor vessel. The rough volume of fuel presented as a total amount gives a better idea how much melted fuel is being dealt with at unit 1. The height range is based on the volume and density range for corium (melted fuel) cited here. 60-100cm would be about 1.9 feet to 3.28 feet or more than a meter high in the upper possible range.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2022 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.