The process to remove the spent fuel from the pool at unit 3 will be a long term project but significant work begins in 2016. TEPCO’s schedule shows the work to install the cover building and platform should start around March of 2016. Once that installation work is completed, underwater small debris removal will begin around mid 2017. Actual removal of the spent fuel would not begin until early 2018.
All of this work will need to be done remotely, adding to the complexity.
The cover building is a modular system that will be installed remotely. A test run has been underway at Onahama port nearby.
What has caught the attention of tech media outlets is the set of robotic arms that will do all the work from cutting up debris to removing fuel and sealing it in casks. Toshiba has been showing off the robotic arms at their facility in Yokohama.
TEPCO has further information here http://www.tepco.co.jp/en/nu/fukushima-np/handouts/2016/images/handouts_160118_01-e.pdf
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.