An unused fuel rod from the unit 6 reactor was damaged in late November according to TEPCO’s most recent roadmap report.
The unused fuel assembly was being decontaminated after being disassembled. This work was intended to be part of a process to remove unused fuel assembles for long term storage. It is assumed the unused fuel assemblies were being stored in the spent fuel pool. This would require decontamination to remove any residual contamination from being in the pool.
TEPCO removed these assemblies from the pool, took the individual fuel rods out, inserted them into a decontamination machine before the assemblies were re-assembled for eventual long term storage.
A fuel rod was improperly inserted into the machine causing it to become trapped between moving parts and stationary parts of the machine. This bent the rod like a wire clothes hanger.
TEPCO claims the fuel rod was not broken open and radiation levels on the surface had not increased. Now they have to figure out how to remove and store this fuel rod. TEPCO cited that they would review the work process to try to prevent a future occurrence.
A translated version of the report can be found here
The original in Japanese here
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2022 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than http://www.simplyinfo.org (or http://www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.