Videos released by TEPCO yesterday included a scope investigation underwater. The water itself was surprisingly clear with a small layer of tan sediment and small white floaters when the water was agitated near the walls or floor of containment. What was even more interesting was the variety of large debris found inside unit 1’s containment underwater. The diagram shows the general area of the debris field inside containment. All of the findings were under the water line in the bottom of containment.
The images below are from the video (included at the end). Explanations of the images are in line between images.
The object on the right is a solid jagged object, not a “splash” of the sediment. Found underwater in containment. Object appears to be about 6-8 inches across.
What appears to be a broken structural piece of metal. It appears to have a 90 degree bend to the shape and a jagged end. Large black pieces in the sediment, these are seen in other views underwater but it is not clear what they are. At the top center of this photo the edge of a piece of sheet steel is clearly visible with the edge bent over.
The images are hard to obtain additional clarity from as the video quality is limited. They do confirm a few things. The water inside containment is relatively clear and clean with a small amount of sediment and floaters. There is a considerable amount of large debris including structural steel, steel pieces and what may be concrete or thick steel. These findings further confirm damage inside containment.
This article would not be possible without the extensive efforts of the SimplyInfo research team
Join the conversation at chat.simplyinfo.org
© 2011-2018 SimplyInfo.org, Fukuleaks.org All Rights Reserved Content cited, quoted etc. from other sources is under the respective rights of that content owner. If you are viewing this page on any website other than www.simplyinfo.org (or www.fukuleaks.org) it may be plagiarized, please let us know. If you wish to reproduce any of our content in full or in more than a phrase or quote, please contact us first to obtain permission.