Japan Earthquake | Page 1318

  • @fitter I am only going by what they named the image "Suppression pool's water surge-tank"
    by Rexz 5/22/2011 11:35:13 PM

  • [IMG]http://www.beaumontenterprise.com/mediaManager/?controllerName=image&action=get&id=399494&width=628&height=471[/IMG]
    by Reed 5/22/2011 11:35:36 PM

  • @Reed just jokeing, but that link looks like your swearing!!!
    by fitter 5/22/2011 11:35:36 PM

  • @fitter its possible and i am not disregarding that possibility just sharing my thoughts and knowledge
    by WolfDK 5/22/2011 11:35:47 PM

  • @fitter LOL
    by Reed 5/22/2011 11:35:50 PM

  • @dean would a Suppression pool surge tank have its vents open to the atmosphere ?
    by WolfDK 5/22/2011 11:37:21 PM

  • @WolfDK same here... many ways to think out a solution and best way i think @Rexz ok thank thats a good start , now i have to think how it would tie in to the system???
    by fitter 5/22/2011 11:37:35 PM

  • I dropped a pepsi can 2 stories to a basement below and it lit perfectly and bulged out on the bottom but no leaks.. so that twisty tank. .well maybe something squished it
    by dean 5/22/2011 11:37:54 PM

  • also, yeah the tsunami would have been a force on the tank, but I would have thought that most damage would have been on one side whilst the water was coming in, and maybe a little on the other as water retreated, however, the tank looks as if it had even damage around it. Also the water wasn't that deep, so surely the pressure of the water on the tank wouldn't have been that high? Only throwing out questions :P no evidence or anything :)
    by Rexz 5/22/2011 11:38:28 PM

  • cam's going for closeups
    by UKVal 5/22/2011 11:38:37 PM

  • Classic !! twitpic.com

    by elainekirk via Twitpic 5/22/2011 11:38:41 PM

  • Look at unit #4, there is a section missing
    by WolfDK 5/22/2011 11:39:24 PM

  • @Reed have it - much thanks!
    by Nancy 5/22/2011 11:39:28 PM

  • the pic's i saw if the same ones had two smaller ones to the side, but after the waves left they looked gone or at least the pic was not picking them up... do you know what part of the plant???
    by fitter 5/22/2011 11:40:20 PM

  • the TEPCAN is zooming on 2
    by Majj 5/22/2011 11:40:26 PM

  • there's quite a heat haze over 2
    by UKVal 5/22/2011 11:40:48 PM

  • @WolfDK where is a piece missing on 4?
    by Nancy 5/22/2011 11:41:05 PM

  • It went all to the Right and the move back
    by Majj 5/22/2011 11:41:40 PM

  • those towers are def leaning to the rht
    by UKVal 5/22/2011 11:42:18 PM

  • The outer structure is missing one section in
    between row 2 to the corner on the far left on the wall facing the TBS cam
    by WolfDK 5/22/2011 11:43:19 PM

  • to = and
    by WolfDK 5/22/2011 11:43:32 PM

  • @UKVal the whole image is a bit at an angle but the right two towers are leaning too.
    by Nancy 5/22/2011 11:43:49 PM

  • @Nancy Tried to get a screenshot, but were not quick enough :(
    by WolfDK 5/22/2011 11:44:14 PM

  • #4 is looking a little worse today............maybe cause I havent seen the cam for a few days.....
    by Angie 5/22/2011 11:46:03 PM

  • can u see the heat haze over 2?
    by UKVal 5/22/2011 11:46:22 PM

  • it's coming out round the roof
    by UKVal 5/22/2011 11:46:52 PM

  • omg now I am dizzy.
    by Nancy 5/22/2011 11:47:17 PM

  • @Nancy yep......like being on a ride.................
    by Angie 5/22/2011 11:48:00 PM

  • @WolfDK are you talking about the concrete cover panel being gone?
    by Nancy 5/22/2011 11:48:11 PM

  • I'm guessing this camera is remotely controlled. It seems to have pan position presets, unless the camera man has a very steady hand.
    by Rexz 5/22/2011 11:48:20 PM

  • looks like front of 4 has collapsed
    by UKVal 5/22/2011 11:48:27 PM

  • def more rubble there...
    by UKVal 5/22/2011 11:49:13 PM

  • @Rexz if your still there, the wave i saw was over half the tank if not closer to two thirds, do you know were the tank sits on the propetrty... i have been working on tracing verious systems with little info so all helps!!!!
    by fitter 5/22/2011 11:52:30 PM

  • I thought I saw a bit fall into 3 earlier but I'm not sure
    by UKVal 5/22/2011 11:53:17 PM

  • @Nancy Got a good sequence of fullscreen screendumps from unit #3 and #4 closeups, want them ?
    by WolfDK 5/22/2011 11:53:21 PM

  • Cam a Hacker get control of the Camera ?? they are showing details .....
    by Majj 5/22/2011 11:53:25 PM

  • @UKVal do you know much about printer files and if they have a history bank
    by fitter 5/22/2011 11:53:33 PM

  • #4 steaming from building center?
    by estacion 5/22/2011 11:53:41 PM

  • Why Tepco is showing us this ???
    by Majj 5/22/2011 11:54:26 PM

  • @Majj Not Tepco TBS news
    by WolfDK 5/22/2011 11:55:05 PM

  • @Majj is it the tepco cam or the u-tube cam
    by fitter 5/22/2011 11:55:12 PM

  • there's nothing wrong with the colours on that cam...
    by UKVal 5/22/2011 11:55:21 PM

  • @fitter just looking over some images to find its location
    by Rexz 5/22/2011 11:55:40 PM

  • @Rexz if i don't answer you it my pc frezzing up, just so you know
    by fitter 5/22/2011 11:56:10 PM

  • I thought he ws going to show us Dainii too
    by UKVal 5/22/2011 11:56:22 PM

Japan Earthquake | Page 1318

Who's Blogging
  • hudebnikhudebnik
  • albleealblee
  • UKValUKVal
  • Jonathan KeeblerJonathan Keebler
  • Oliver (ScribbleLive)Oliver (ScribbleLive)
  • kaykodhkaykodh
  • MarkfmMarkfm
  • AngieAngie
  • Mid ValleyMid Valley
  • Matt (ScribbleLive)Matt (ScribbleLive)
  • George GibbGeorge Gibb
  • elainekirkelainekirk
  • PKelleyPKelley
  • lillymunsterlillymunster
  • deandean
  • bobo
  • EdanoEdano
  • DebDeb
  • Pedro Jesus
  • IanGoddardIanGoddard