Japan Earthquake | Page 958
fitter check the updates back for awhile.. I'm trying my best to sip my coffee and search like a mad manby dean 5/3/2011 2:44:58 PM
@Peter Melzer according to the blueprint of #1 the invert elevation of the Reactor is 15200 the TOP of Flange Face is : 31660 or 31650 or 31680 (can't tell the forth digit)by fitter 5/3/2011 2:46:27 PM- @dean have been trying to watch YOU do one hell of a serch job... do you have a fast computorby fitter 5/3/2011 2:47:13 PM
- www.tepco.co.jp CHECK THISby dean 5/3/2011 2:47:28 PM
- MY lap top is speedyby dean 5/3/2011 2:47:44 PM
I half expect they hit #4 with too much water. Perhaps basement water level is now way up. Note, I thought they were supposed to have installed an instrument pack on #4 SFP in late April, temp and water level, so it is a bit surprising that the SFP table listing for 4 still showing no temperature, 計器不良 (instrument failure).by Markfm 5/3/2011 2:49:15 PM- @Markfm the post dean just listed is the one i was refering to, and i think i forgot to say why i was explaining....by fitter 5/3/2011 2:49:16 PM
- @dean will be learking between runs,,by fitter 5/3/2011 2:49:43 PM
on the bot vid i posted earlier the bot stops t the top of the stairs leading down to the containment i sent you photos of #1 containment this morning nancy how are they going to clear air down there? They cant possibly be considering sending men down i hopeby elainekirk 5/3/2011 2:50:49 PM- ha ha .. I just read a funny one... from TEPCO.. #4 is contaminate because they have been pumping contaminated seawater there.. DUHby dean 5/3/2011 2:51:36 PM
@Fitter/Dean Thanks, I added a link to the schematic on the UsefulLinks page on the Wiki.by Markfm 5/3/2011 2:53:27 PM- Tis a sad day when the seawater is hotter than what they're cooling...by Markfm 5/3/2011 2:53:51 PM
- WELL.. we made the physics forum...by dean 5/3/2011 2:53:53 PM
- What would be most helpful is a sticky that has, without additional interpretation, and indexed as appropriate (including location, date and time), links and graphics (with original source and copyright data) of ...
One could do that: a thread where each of the regulars has their own few postings that they try to hold up to date.
Another possibility is a wiki. There is fukushimafaq.wikispaces.com and fukushima.wikispaces.comby dean 5/3/2011 2:54:16 PM - @dean i agree if i think i know what you are saying, its getting hard to trace the origin of the data without links... and the pictures have arrows but the discription is always cut off..by fitter 5/3/2011 2:57:01 PM
- this video has some good angles that i have not seen before..@ dean (guess i'm half ass backwards this moring)by fitter 5/3/2011 2:58:34 PM
- well. we need to sort it all out fitterby dean 5/3/2011 2:58:35 PM
- @dean sound like a good project to try a live event for maybe... but i know you don't want my knowlege of putting stuff in files on a computor (thats why i started printing) but i like listingby fitter 5/3/2011 3:01:16 PM
- that video I posted is very good.. for studying the damage outside..by dean 5/3/2011 3:02:03 PM
@dean I started archiving all the large images over at Jim's server. Maybe we create some big source lists over on the new website?by Nancy 5/3/2011 3:02:46 PM- i posted it up aboveby dean 5/3/2011 3:02:58 PM
- and have another oneby dean 5/3/2011 3:03:03 PM
- Nancy.. these videos are fantasticby dean 5/3/2011 3:03:15 PM
- @dean @dean Yes it shows a lot of info....by fitter 5/3/2011 3:03:29 PM
- fitter slow mo will show some of your piping systemsby dean 5/3/2011 3:04:51 PM
- @elainekirk supposedly the air duct system for the normal areas of the plant somewhat work and will be used to get those areas cleaned air-wise. Containment is going to be another issue. I really don't know how they will get in there unless the open doors for the bots and send them in. Whomever is in that doorway will likely still get a big dose.by Nancy 5/3/2011 3:04:53 PM
- @Dean, where did you find that video? Going to do some screen captures of the new images and angles in that.by Nancy 5/3/2011 3:07:22 PM
Morning @all. Jumping in late to this, but over on the Physics forum FHM seems to be the Fuel Handling Mechanism... the refueling crane on rails.by radioguy 5/3/2011 3:09:46 PM- @dean That skimmer mechanism looks just like the overflow in the radiator in my car... and when I keep pouring water in when it's full, it drains out on the ground. I wonder where theirs drains out.by radioguy 5/3/2011 3:12:34 PM
- Nancy.. it's on page 349 of the physics forum.. and number # 5577 by someone named Riveby dean 5/3/2011 3:13:20 PM
- by dean 5/3/2011 3:13:30 PM
- right radioguy..by dean 5/3/2011 3:13:59 PM
- @Nancy they may try to enter/tie-in systems on the blown out floors or openings.. they are going to have better air flow and they have "blueprints" and better pics than us, I would ttry and approch first the systems in lower bad air and see it they hold anythingby fitter 5/3/2011 3:14:08 PM
- not sure on that one radioguy ..by dean 5/3/2011 3:14:24 PM
- added grabbing stills of the video Dean pinned to my growing list of things to do today. Is it just me or did info start coming from everywhere today.by Nancy 5/3/2011 3:19:18 PM
- @dean I hear TEPCO is looking for a "FEW GOOD MEN" to ride the ball down and hook up the equipment HE he... (glossery... ball = the balance ball above the hook on a crane (OHSA took that fun away... ) Any takers???by fitter 5/3/2011 3:20:00 PM
- www.tepco.co.jp nice informationby dean 5/3/2011 3:21:14 PM
- (Of course, getting to full and overflowing may be the least of their worries)by radioguy 5/3/2011 3:21:35 PM
- @dean Can you post the info to find the corranating numbers on you reactor post earlier if show a lot of pipie and the numbers I am sure will tell me what the systems areby fitter 5/3/2011 3:21:46 PM
- lol Nancy.. you should have woken up earlier dang itby dean 5/3/2011 3:21:56 PM
- fitter.. the are scattered through outby dean 5/3/2011 3:22:33 PM
- @dean the few good men or the drawings.... he he heby fitter 5/3/2011 3:23:16 PM
- @fitter Wow that sounds like a fun way to go out in a heroic bang. I'm assuming that pays more than the $5,000/day for qualified sponges...by radioguy 5/3/2011 3:23:51 PM
- ha ha. you know those crazy steel workers would right that downby dean 5/3/2011 3:24:13 PM
- @radioguy did you ever ride the ball.... its fun...by fitter 5/3/2011 3:24:37 PM
Japan Earthquake | Page 958
- Who's Blogging
-
hudebnik
alblee
UKVal
Jonathan Keebler
Oliver (ScribbleLive)
kaykodh- Markfm
Angie
Mid Valley
Matt (ScribbleLive)
George Gibb- elainekirk
PKelley
lillymunster
dean
bo
Edano
Deb- Pedro Jesus
IanGoddard